Sheet Metal Intake Manifold Entirely by Hand (Part 2)

Sheet Metal Intake Manifold Entirely by Hand (Part 2)

Round two of the completely hand built Sheet Metal Intake Manifold. What two challenges remain to be solved? Find out here!

Sheet Metal Intake Manifold Entirely by Hand (Part 1)

Sheet Metal Intake Manifold Entirely by Hand (Part 1)

Building a custom spec Sheet Metal Intake Manifold is challenging enough by itself, but there is one catch with building this one....

Video: How To Install an Inside Net

Video: How To Install an Inside Net

There seems to be a lack of information regarding proper installation of an Inside Net, sometimes called a "Driver's Net". You can either dig through 936 pages of the SCCA GCR Rulebook, OR, you can watch this video.

Video: How To Build A Time Attack Roll Cage

Video: How To Build A Time Attack Roll Cage

The Official Build Blog for How To Build a Time Attack Roll Cage featuring a 2000 Mitsubishi Lancer Evolution VI RS  Tommi Mäkinen Edition (TME). This thread features Parts 1 & 2, build pics, Professional Photographer pics, the Gag Reel, and more!! Everything in one central location.

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 4 - Perches & Accessories

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 4 - Perches & Accessories

Part 4 of a 4 part How-To series demonstrating how to narrow a Ford Explorer 8.8 Rear Axle. This section covers the selection and installation of perches and accessories required to install the now narrowed Ford Explorer 8.8.

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 3 - Cut & Weld

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 3 - Cut & Weld

Part 3 of a 4 part How-To series demonstrating how to narrow a Ford Explorer 8.8 Rear Axle. This section covers the  cutting and welding back together the axle tube which is required to narrow the Ford Explorer 8.8.

Spare Tire Fuel Cell

Spare Tire Fuel Cell

When your classic Buick is slammed to floor with a set of bags, you tend to run into issues with the gas tank scraping. Filling the trunk with air ride equipment takes a lot of space as well - so what do you do? How about fabricating a fuel cell to fit in the spare tire well...?

Right Hand Drive Swap in 3 Days: The Assembly

Right Hand Drive Swap in 3 Days: The Assembly

The final round and finishing pieces needed to get this Mighty Max Right Hand Drive Swap back on the road! Check out what needed to be solved and a cool Q & A at the end!!

Photo Shoot With Some Good Friends of Team Hybrid

Photo Shoot With Some Good Friends of Team Hybrid

It was a great sunny Sunday afternoon in LV when I figured there wasn't a whole lot on the schedule for the day, so why not gather up some friends for an impromptu photo shoot?

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 2 - Strip Down

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 2 - Strip Down

Part 2 of a 4 part How-To series demonstrating how to narrow a Ford Explorer 8.8 Rear Axle. This section covers the strip down and measurements in preparation for cutting and welding to narrow the Ford Explorer 8.8.

#FourRotorFun: Cooling System Part 1 - The Radiator

#FourRotorFun: Cooling System Part 1 - The Radiator

What What would you do if you found out your limitless build had no space for any kind of conventional radiator? What if you had to design something unconventional to cool down an engine that can't be replaced easily? What would you come up with?

Right Hand Drive in 3 Days: The Swap

Right Hand Drive in 3 Days: The Swap

How lucky could I get twice? How another very good friend stepped in to help solve another major problem with the swap. Read about what that problem was and the RHD swap build in here.

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 1 - Prelude and Q&A

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 1 - Prelude and Q&A

Part 1 of a 4 part How-To series demonstrating how to narrow a Ford Explorer 8.8 Rear Axle. This is a quick reference prelude section with common questions and answers as well as all the info you need to help make your selection.

Right Hand Drive Swap in 3 Days: Dash Prep

Right Hand Drive Swap in 3 Days: Dash Prep

How a very good friend coincidentally made the whole RHD swap possible. Also a demonstration of how to prep and repair a cracked dash for a color change.