I'll shoot you straight - There were some delays in getting Season 2 launched. While the official kick-off has not happened yet, you can still catch 3 full episodes right here, right now, and ONLY on The Fabrication Series Official Build Blogs before they get released to YouTube!
Enjoy!
Pie & Lobster Cuts Part 1
The unique method to create a bend in a tube without bending it. Pie cutting a tube at a particular angle will allow you to create a bend radius when calculated and mated properly. There are even some really unique features of using pie and lobster cuts which can not be achieved with a typical bend.
Vented Valve Cover
When your factory ventilation system just can't cut it anymore, you need to find a way to improve it. This simple how-to will demonstrate the common methods and practices for identifying the valve cover metal, choosing fittings, installing fittings, and MORE!
Custom Chopper Seat Pan
Three pieces combined to make one. Sheet metal work is an art for all to itself, but with a few techniques, some practice, and a design in mind, you can easily create one-off custom works such as this Custom Chopper Seat Pan.
MORE EPISODES and Info along with the Official Kick-Off of Season Two of The Fabrication Series SOON!
You've seen them used a few times over the past year, but what are Fabricated Tube Mounts and how do you make them?
THREE Awesome NEW episode from The Fabrication Series Season 2
You can only find them HERE!
Want to know how to bend tubes for your next project? Well, you might need to know the basics of measuring, calculating, and setting up the bender for the bends you need to tackle.
If you've ever wonder how to electrocute yourself without being killed, here is the answer...
It started as nothing more than a Crazy Cart. What was built for it is one of a kind.
The Official Build Blog for How To Build a Tube Chassis Front End featuring a 1991 Nissan 240sx (S13). This thread features each individual chapter as it uploads every Wednesday. Between videos will be pics, discussions, build info, and more!! Everything in one central location.
Watch as The Fabricator ignores a VERY IMPORTANT rule!
An easy to follow How To video demonstrating the correct installation of IHeartGussets S13 Strut Tower to Firewall Gussets.
A 15 year fabrication secret demonstrated as The Fabricator shows you step by step how to build a custom tubular Strut Tower Bar on a Nissan S13 240sx with a tube front end.
Purge Blocks actually serve more than one purpose. Do you know what they do?