A Good Start to Autocross

A Good Start to Autocross

"It's never too late." A very simple mentality that drove this Mitsubishi Mirage owner right to the starting line of a racing career that began with a custom built Power & Performance Package

RX-7 Sub-Frame Steering Rack Drop - #FourRotorFun

RX-7 Sub-Frame Steering Rack Drop - #FourRotorFun

A necessary sub-frame and steering rack modification for 20b and 26B Rotary Engine Swaps in the FD3S Chassis.

360 Car Show 2015

360 Car Show 2015

The best coverage I could get because of something completely unexpected....

Sheet Metal Intake Manifold Entirely by Hand (Part 2)

Sheet Metal Intake Manifold Entirely by Hand (Part 2)

Round two of the completely hand built Sheet Metal Intake Manifold. What two challenges remain to be solved? Find out here!

Sheet Metal Intake Manifold Entirely by Hand (Part 1)

Sheet Metal Intake Manifold Entirely by Hand (Part 1)

Building a custom spec Sheet Metal Intake Manifold is challenging enough by itself, but there is one catch with building this one....

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 4 - Perches & Accessories

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 4 - Perches & Accessories

Part 4 of a 4 part How-To series demonstrating how to narrow a Ford Explorer 8.8 Rear Axle. This section covers the selection and installation of perches and accessories required to install the now narrowed Ford Explorer 8.8.

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 3 - Cut & Weld

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 3 - Cut & Weld

Part 3 of a 4 part How-To series demonstrating how to narrow a Ford Explorer 8.8 Rear Axle. This section covers the  cutting and welding back together the axle tube which is required to narrow the Ford Explorer 8.8.

Spare Tire Fuel Cell

Spare Tire Fuel Cell

When your classic Buick is slammed to floor with a set of bags, you tend to run into issues with the gas tank scraping. Filling the trunk with air ride equipment takes a lot of space as well - so what do you do? How about fabricating a fuel cell to fit in the spare tire well...?

Right Hand Drive Swap in 3 Days: The Assembly

Right Hand Drive Swap in 3 Days: The Assembly

The final round and finishing pieces needed to get this Mighty Max Right Hand Drive Swap back on the road! Check out what needed to be solved and a cool Q & A at the end!!

Photo Shoot With Some Good Friends of Team Hybrid

Photo Shoot With Some Good Friends of Team Hybrid

It was a great sunny Sunday afternoon in LV when I figured there wasn't a whole lot on the schedule for the day, so why not gather up some friends for an impromptu photo shoot?

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 2 - Strip Down

How To Narrow a Ford Explorer 8.8 Rear Axle: Part 2 - Strip Down

Part 2 of a 4 part How-To series demonstrating how to narrow a Ford Explorer 8.8 Rear Axle. This section covers the strip down and measurements in preparation for cutting and welding to narrow the Ford Explorer 8.8.