Some of my top picks from viewer submitted projects. Keep up the fantastic work, and thank you for being a part of The Fabricator Series!
Check out some of the notch work from Jme Everson out in the UK. Looking great and all done without a notcher just like the video demonstrates!
Check out the video to learn how to notch tubes without a tube notcher!
https://www.youtube.com/watch?v=mHBanmfn_CA
This is a really cool project submitted by Travis Fleshman who says he used every aspect of the roll cage and notching videos to create this epic cage for his Side by Side. I particularly like how the twin main hoop follows the angle of the rear down tubes.
This is a fantastic looking cage! Well done!!
Get some handy tips on tube bending here!
https://www.youtube.com/watch?v=3n_lf2RHIPs
I really like this one. Donald Bruce in New Zealand noticed my vice stand in some of the videos and decided it looked handy enough to make one for the home.
It is extremely handy to have a mobile vise stand to float around the shop instead of leaving it attached to a bench.
Years ago I grabbed some scraps and thought nothing of it. Now I can't seem to imagine fabrication with my vise stuck to the bench.
Great job, Donald!
Karl Cox from England was watching the Roll Cage vids and decided to build one! Now lets see you chop the front end off for a tube front!
Great job! Looks fatastic!
Want to see how to build a Roll Cage? Check out the two-part video!
https://www.youtube.com/watch?v=uqY6KITUnXU
Hywel Rosenthal has been emailing me for specifics on roll cage construction for a 350z. After watching the videos closely, Hywel gave it a go.
The strict attention to detail, and the repeat questions regarding specific measurements regarding process and fit really show in this pic.
Fantastic work! I can't wait to see more updates as time progresses!
UPDATE! Here is the completed cage. Looks great!
Check this one out from Paul Ilievski in Australia who is building a pair of Suzuki Vitara's into Comp Truck Rock Crawler's. These are going to look epic when complete!
More Viewer's Projects Updated Regularly!
Keep Checking Back for MORE!
Would you like your build featured on The Fabricator Series? Drop me an email* or send a message on Facebook or Instagram along with some pics and descriptions of your build. It just might make it here!
*Note - Email form will not allow pic attachments. Please wait for a reply email to attach pics.
Purge Blocks actually serve more than one purpose. Do you know what they do?